ippost IPPOST is used to send a single file to a group of destinations or a combination of groups and clients. Its main use is for syndication, library, telex, fax and mailbox. It compares FIP header fields to the GROUPS parameter file in tables/sys. IPPOST scans the 'post' queue and for each file it checks the source, destination (DU) and sub-destination (DA hdr field) and decides which destinations it is to go. Slightly different rules are used for differing types of traffic. - All syndication and library clients MUST be specified in the GROUPS file. - All mailbox clients MUST be specified in the mail/LOGON file. - All ftp, internet-mail, dialup, telex and fax destinations are allowed to pass through. Fax clients get sent to POSTFAX, telex to POSTTLX, ftp to POSTFTP and dialups to POSTDIAL - all of which must be in USERS Note that client names are case INsensitive so it matters not at all whether the name is Upper or lower or both. The groups file has the following syntax : ; comment group: (name) (list of clients in this group) eg : group:syn profile mead dtimes ql client: (name) type: (type of client) number: (telex of fax number) or client: (name) type:other dest: (destination) eg: client:gorby type:telex number:064-77878 eg: client:gorby type:other dest:russia WHERE Client types are : mail - mailbox, files loaded into spool/mail/logon where logon is in tables/mail/LOGON. syn - syndication, file moved to spool/syn/clientname lib - library download, file moved to spool/lib/in for further processing by iplibfilter or iplib pc - pc, file is translated and moved to spool/pc/clientname with a pc style filename bdcast - news agency broadcast, file moved to spool/clientname dialup - send file using dialup (probably 'ipdial') ftp - send file using ftp (probably 'ipftp') fax - send file using fax telex - send file using telex alertmsg or atexmsg - msg for ipbox logon (or the Atex j11) email unixmail - mail for unix sendmail, file send to spool/2go for wheel to distribute using DU TOUNIXMAIL, DA client other - send to another destination for this client. The 'dest' subparameter MUST exist for this client. If not the default dest is OTHER. ignore - ignore all files for this client !! Note that it is just the first letter of the client type that is checked and is unique (or first two for FTP). Various subparameters are possible for each client line (except for ALERTMSG) : Note that spaces are used to separate the subparams, so embed with double quotes (or use 's' if you need to enter them in a string. type: as above. This is the only mandatory subparameter. number: for EMAIL this is the email address of the subscriber. for TELEX this is the telex number of the subscriber. for FAX this is the telephone number of the subscriber. for DIAL this is the telephone number of the subscriber. eg client:fippo type:unixmail number:firstname.lastname@example.org dest: for other this is the DU or destination (in tables/sys/USERS) fiphdr: by default the FipHdr is stripped off the output file. Use this to retain it. Generally this is used to retain valuable FipHdr information for 'bdcast', 'other' types. There is no data with this subparam. extra: Add more FipHdr fields to the outbound FipHdr. Any FipSeq can be added. Remember to add 'fiphdr:' too to carry over any old fipHdr fields, otherwise they will be ignored. eg client:drongo type:bdcast extra:nQD:PostTime=$h:$nn before: Add data at the top of the output file. eg client:helene type:telex before:"Telex fpr The Mekonsn" after: Add data at the end of the output file. xchg: Run 'ipxchg' against the output file before sending/storing it. eg client:daswong type:bdcast xchg:cr2nl where there is an xchg parameter file called tables/xchg/CR2NL For FTP, Fax and Unixmail this xchg is NOT run by 'ippost' but is flagged so that 'ipxchg' is run in the usual Fip Copy Flow. convnl: Convert all CR or NL to CR NL to create a Dos/Windows readable file. This is automatically triggered for 'type:pc' outfmt: The Output format file - FipHdr field DF or (for bdcast) DB. queue: Place all files in this queue under spool/syn. This overrides the default which is : for dial spool/2go for ftp spool/2go for fax spool/2go for unixmail spool/2go for syn spool/syn/(name of client) for bdcast spool/(name of client) This allows several clients or sub-clients to share a transmission. Any errors such as No Such Routing, are sent back to the sender if there is both a source header field (SU) and a sub-source or author field (SA). In any case they are logged. Text is NOT translated except for 'pc' clients where NL-> CR NL unless FBIN. For Alert messages, (ie if DU:ALERTMSG or ATEXMSG) then DA holds the logon for the message. IPPOST checks the tables/mail/ALERTMSG (if it exists) or the ATXMSG file (if it exists) and sends to a DU of MSGFORALERT or MSGFOR ATEX respectively. If not then the tables/mail/LOGON file is checked - if there, it is added to the spool/mail/LOGON; otherwise it is sent back if there is an SA else it is junked. The destination for Msgs to Atex is MSGFORATX_NETWORK (uppercase) which should be in the destination file (tables/sys/USERS) and uses output format (DF) of ATXMSG which should be in tables/out, tables/news or tables/gateway. For Fax, telex, ftp, unixmail (ie internet-mail) and dialup - If a specific 'queue' subkeyword is present for that client, the files are stuffed in that folder. Otherwise all files are moved to spool/2go for 'ipwheel' to distribute using a destination of : email - TOUNIXMAIL unixmail- TOUNIXMAIL w4 - POSTW4 ftp - POSTFTP dialup - POSTDIAL fax - POSTFAX telex - POSTTLX All incoming syndication and library files are saved in saves/DU - ie saves/lib for library. (NOTE version change - this is now valid ONLY if the '-S' input switch is specified). Input Parameters are (all optional) : -q : input queue default: spool/post -i : input queue default: spool/post -d : done queue for incoming files default: none Normally files are deleted after processing. -g : name of parameter file default: tables/sys/GROUPS -t : scan time for the input queue default: 5 secs -l : do NOT return logs to sender default: log all errors -L : log all client entries for each file default: no -m ; report errors as log type "ox" default: report as a failure "x" -M ; do NOT report if the client does NOT exist default: do -z : name of parameter file default: tables/sys/GROUPS -Z : name of the optional POST file default: sys/POST -v : version number and exit An optional Parameter file - tables/sys/POST can be used for: ; comment okmsg:rnLooks good to mern dudmsg:rnAbsolute rubbish, Thanksrn client-not-found:(destination) fiphdr-not-found: (2 letter FipHdr field) log-copy:(FipHdr DU(s)) log-raw-copy:(FipHdr DU(s)) balance-group:(Balance Group) balance-all-group:(Balance Group) balance-this-type: (POST type of file) round-robin-dial: (number) round-robin-ftp: (number) round-robin-unixmail: (number) round-robin-fax: (number) round-robin-telex: (number) add-unique-id: (optional FipHdr field) global-extra-fiphdr: (FipHdr to be added to all files with 'fiphdr') newSN: (FipSeq for the SN) newDA: (FipSeq for the DA) chkexists: (Full Path/file or queuename) chkexists-timeout: (time between trying/logging if path is not there) xchg-program: Replacement path/file for ipxchg default:/fip/bin/ipxchg xchg-queue: Replacement output folder for xchg default: xchg wheel-queue: Replacement output folder for wheel/2go default: 2go syn-queue: Replacement output folder for syn default: syn extra-email-fiphdr: (FipHdr) Send a copy of the incoming file to the email addresses in this FipHdr (if it is non-blank) check-primary-server: pseudo-host name that is specified in tables/sys/DEST_REDUN log-line: (FipSeq) log line In more detail... - change the 2 messages and to define any client types : ; comment okmsg:rnLooks good to mern dudmsg:rnAbsolute rubbish, Thanksrn - any entry in the FipHdr DA field which is NOT specified in the GROUPS file (or LOGON etc for mail types) is normally ignored/deleted. To send them to another destination for further processing, use client-not-found:(destination) where destination is the usual entry in the sys/USERS file. Plus fiphdr-not-found: (2 letter FipHdr field) This adds a FipHdr with either a '+' if the client is valid and '-' if not. - make a copy of all files going to valid clients and send to this destination log-copy:(FipHdr DU(s)) eg log-copy:w4xpost Use this for W4 or another logging system. log-raw-copy: (ditto) is similar but is the IMPUT file (ie raw copy) rather than the OUTPUT file which may have been through an xchg (UNIX only) - make a mirror copy of all files going to valid clients using balance balance-group:(Balance Group) eg balance-group:balanceData Normally only files NOT being passed to 'ipwheel' or 'ipxchg are balanced as they too will balance their files. To balance EVERYTHING, use balance-all-group: Alternatively use 'balance-this-type' to balance ONLY files from that type. ie balance-this-type:syn Alternatively use 'balance-on-queue-only' to balance ONLY files which are for a client with a 'queue' subparameter. ie balance-on-queue-only: - Use several outputs for this type of delivery. round-robin-dial: (number) round-robin-ftp: (number) round-robin-unixmail: (number) round-robin-fax: (number) round-robin-telex: (number) Eg round-robin-ftp:3 So the first file for ftp is sent to POSTFTP1 the second to POSTFTP2 the third to POSTFTP3 the fourth to POSTFTP1 etc add-unique-id: (optional FipHdr field) This adds a new FipHdr field containing a unique ID which is made from the IPaddress, time and sequence number. It is quite long ! global-extra-fiphdr: (FipHdr to be added to all files with 'fiphdr') Use this to add more FipHdr fields to an existing hdr. It works only for those clients WITH the 'fiphdr:' specified. It is is addition to the 'extra:' keyword specified on each line. newSN: (FipSeq) The FipHdr field SN (source name) is used to track the file thru the system. If there is traffic which does NOT have an SN, use this to add one. eg ; test if there IS an SN combie:Q1 SN ; add the SN if there is NOT one - use the original if there is. newSN:Q1SN#XX:$oWO-WR-WD-WE In this example, if there IS an SN wth something in it, that is used Otherwise, use the contents of WO, WR, WD and WE with dashes between. newDA: (FipSeq) The FipHdr field DA (sub-destinations) contains a list of all the groups and/or clients to send to. If there are files which do NOT have a DA, use this to add one. eg ; test if there IS an DA combie:QA DA|AA,default newDA:QA Here we say use the QA FipHdr field which will be either the DA if there, or the AA FipHdr field if not, or the string 'default' if neither have data. check-primary-server: pseudo-host name that is specified in tables/sys/DEST_REDUN Use this when an ipspool on 2 systems is accessing the same remote folder - in a redundant way. that is used whether the current host should be getting the files or not. ie in the parameter file is check-primary-server:postsvr and in the DEST_REDUN is ; psuedohost primary secondary postsvr fip1 fip2 and in the SYSTEM file for both fip1 AND fip2 there is the same 'ippost' line with the same param eter file If fip1 is up, 'ippost' on fip1 will always get while on fip2 it will just check/loop. If fip1 is down 'ippost' on fip2 will start processing the files. - CHKEXISTS is a complete pathname of either a standing file or a queue. This is used to check that NFS drives are actually mounted BEFORE writing new files. NOTE THAT PROCESSING BLOCKS FOR THIS FILE AND WILL BE RETRIED AT LEAST ONCE A MINUTE. eg : chkexists:/data1/nfs/helios/.Desktop WinNT/2k remote drives (also called UNC) may be specified as : (note the double \ for each and the 'ignore-escapes to ignore the dots in the IP address or hostname being escaped): The use of fwd slashes '/' rather than '' make the string much easier to read !! Use 'chkexists' to make sure the drive is available first chkexists://220.127.116.11/d$/.DSstore - log-line: (FipSeq) log line A couple of temporary fipHdr fields are added E1 - index number of the client E2 - name of the client E3 - type of method - FTP, EMAIL etc default is "client.E2 : SN DU DA (E1.E3)" The incoming file may optionally have a FipHdr POST_LOGCOPY: (FipSeq) to override the 'logcopy' parameter. The fipHdr can have NO data to disable just for that one file. The incoming file may optionally have a FipHdr POST_CLIENT_ONLY: which signifies that the sub-destination (DA:) must be a client only - all groups are ignored. Where sections of FipHdr fields are required or changes to the output style, use keywords : fixed, partial, combie, optional, repeat, newdate and/or style. (see The SysAdmin manual for more information). They are normally specified : fixed:QZ 1234543 partial:QT ST,3,2,U,<,> combie:QY ep|na,(0000000)a option:QE ep,11,7,s repeat:QK XK,-,3 or repeat:QP PK,,4,#X style:QS XN,%.03d replace:QZ XK a=b c=d ee=f The current maximum number of clients in a group or a single transmission is 500. Version Control ;055x17 30mar00 added Sort of Groups and the Groups ptr table ;a 28nov00 added POST_DIAL as a type ;b 01dec00 added add-unique-id: ;c/d 03feb01 added global-extra-fiphdr and newSN ;e 08feb01 added round-robin-telex ;f 15may01 bugette with case of first chr for Sort of clients ;g 17aug01 added 'newDA' as FipSeq for DA ;h 18mar02 added balance-this-type/DGtype ;i 22mar02 added POST_RESEND_QUEUE as FipHdr ;j 23mar02 cleanup of alerts ;k-m 17dec03 WINNT cleanup ;n 09feb04 bugette - allow 40 chrs for SN if none in FipHdr ;o 03nov04 make names up to 100 chrs from 20. ;p 11oct05 added FipRemote and Email ;q 17jan06 added chkexists... ;r-u 17aug08 added xchg/wheel/syn-queue and xchg-program ;v 14sep06 added validClientFipHdr + or - ;w 06nov06 added extra-email-fiphdr ;x15 28feb07 added FipHdr POST_LOGCOPY: ;x1 strparse logcopy ;x2 log-raw-copy ;x3 pramfile as -Z ;x4-7 added -L ;8 POSTW4 and reorder fiphdr ;10 5jan09 added POST_CLIENT_ONLY: ;11 28jun10 allow queue:/... ;12 Win2k missing clients better ;13-15 22jun11 added check-primary-server ;15 added log-line: ;16 added speedy ;17 30apr14 added file-trace (copyright) 2014 and previous years FingerPost Ltd.